Info |
---|
Repository Mailing List Issues IRC
|
Table of Contents
Table of Contents |
---|
Introduction
The goal of Project Skara is to investigate alternative SCM and code review options for the OpenJDK source code, including options based upon Git rather than Mercurial, and including options hosted by third parties.
The technical parts of project Skara includes several server-side tools (also called "bots") aiding contributors during code reviews. The Skara technical tooling also includes several command-line utilities for interacting with Git source code hosting providers from the command-line.
Using an external Git source code hosting provider comes with several benefits, including:
- Performance
- Community
- API
Many, if not all, external Git source code hosting services available have excellent performance, not only with regards to network performance but also when it comes to availability (uptime). The largest Git source code hosting providers also offer the OpenJDK community to tap into large, existing, communities of developers and potential contributors. An additional benefit of using an external Git source code hosting provider is getting access to an API. These APIs enables programs to interact with developers on the external Git source code hosting provider. Although not impossible to achieve today by interacting with developers over email, it is considerably harder to implement programs that interpret free form text in emails compared to using a structured API.
A significant risk when using an external source code hosting provider is to become dependent on the external source code hosting provider. The version control data itself will always be independent of source code hosting provider due to distributed architecture of Git itself. However there is a large risk in metadata such as code review comments becoming "locked in" on a particular external source code hosting provider. Mitigating this risk is a large part of Project Skara and the following work have been done so far:
- replicating all discussions in all pull requests to the OpenJDK mailing lists
- archiving all discussions in pull requests in two formats:
- mbox (for human consumption)
- json (for software consumption) (not implemented yet)
- notifications of all pushes to the corresponding *-changes@openjdk.java.net mailing lists to avoid dependence on any provider's RSS feeds
- using the OpenJDK census for user organization and privilege level to avoid any dependencies on external Git source code hosting provider's user organization tool
setting up to the domain http://git.openjdk.java.net/to redirect to OpenJDK's current external source code hosting provider to avoid polluting JBS and mailing lists with direct links to an external Git source code hosting provider
Support for multiple external source code hosting provider has been a strict requirement for all server-side and client-side tooling to avoid the issue of having any tooling take on a dependency on a particular external source code hosting provider's API. All tooling is also required to work with the GitLab Community Edition (GitLab CE) which is an open source project.
Another large part of Project Skara has been to ensure that there are multiple workflows available when interacting with a Git external source code provider, including one that preservers as much as possible of the OpenJDK community's current workflow. The Skara tooling currently supports the following workflows:
- Mailing list + CLI based (similar to current workflow)
- Web browser + CLI based
- CLI only
- Text editor/IDE
All workflows can be used interchangeably and different contributors can use different workflows at the same time (even while working on the same change). The support of multiple workflows comes from the APIs provided by the external Git source control hosting provider. Examples of the work done to support multiple concurrent workflows include:
- Two-way mailing list synchronization (you can comment on pull requests via OpenJDK mailing lists)
- Automatic "RFR" emails sent to mailiing lists for newly created pull requests
- Automatically determining mailing lists to "CC" for newly created pull requests
- Automatic generation and hosting of "webrevs" (including incremental webrevs)
- Automatically run "jcheck" on every commit in every pull request
- Implement CLI tools to list, fetch, view, approve and integrate pull requests
- Implement backwards compatible ports of jcheck, webrev and defpath
Getting Started
The following sections will get you started with Git, the external Git source code hosting provider GitHub and, if you want, the Skara CLI tooling.
Git
Install Git CLI client
GNU/Linux
CentOS/Oracle Linux/RHEL
Code Block | ||
---|---|---|
| ||
$ sudo yum install git |
Debian/Ubuntu
Code Block | ||
---|---|---|
| ||
$ sudo apt install git |
Fedora
Code Block | ||
---|---|---|
| ||
$ sudo dnf install git |
macOS
There are two ways to install Git on macOS: using Homebrew or using a direct download.
Using Homebrew
- Install Homebrew: https://brew.sh/
brew install git
Using direct download
Windows
Install Git For Windows (maintained by Microsoft): https://gitforwindows.org
Initial Configuration
Git requires that you configure a username and an email. Use your full name as your username and your regular email address for the email:
Code Block | ||
---|---|---|
| ||
$ git config --global user.name 'Your Full Name' $ git config --global user.email 'your.name@host.com' |
For example my name is "Erik Duveblad" and my email is "erik.helin@oracle.com". Therefore I would run:
Code Block | ||
---|---|---|
| ||
$ git config --global user.name 'Erik Duveblad' $ git config --global user.email 'erik.helin@oracle.com' |
Additional Clients
There are several additional clients available for Git that can be used instead of (or in combination with) the Git CLI tool. Please see the following subsections for how to interact with Git from the desktop, IDE or a text editor.
Desktop
- SourceTree (macOS, Windows)
- gitg (GNU/Linux)
- Tower (macOS, Windows)
- GitKraken (GNU/Linux, macOS, Windows)
- Sublime Merge (GNU/Linux, macOS, Windows)
- TortoiseGit (Windows)
- GitFiend (GNU/Linux, macOS, Windows)
- Fork (macOS, Windows)
- Git Cola (GNU/Linux, macOS, Windows)
Mobile/Tablet
- Working Copy (iOS, ipadOS)
- Pocket Git (Android)
IDE
The following integrated develop environments (IDEs) all have Git support built-in:
Text Editors
The following text editors either have Git support built-in or as part of a plugin:
GitHub
GitHub is an external Git source code hosting provider at https://github.com/. To create an account and get started, follow the instructions at https://github.com/join. We strongly recommend that all OpenJDK contributors enable two-factor authentication (2FA) on GitHub. To enable 2FA for your account on GitHub, follow the instructions at https://help.github.com/en/articles/securing-your-account-with-two-factor-authentication-2fa.
Associating your GitHub account and your OpenJDK username
If you are an OpenJDK Author, Committer or Reviewer then you can associate your GitHub account with your OpenJDK username by opening an issue at https://bugs.openjdk.java.net/secure/CreateIssue.jspa?pid=11300&issuetype=1. As a title for the issue, please use "Add GitHub user <YOUR-GITHUB-USERNAME>".
This way the server-side tooling (the "bots") will recognize you on GitHub as an OpenJDK Author, Committer or Reviewer.
Skara
The Skara projects contains tooling for contributors working with OpenJDK projects and their repositories. The following CLI tools are available:
git-jcheck - a backwards compatible Git port of jcheck
git-webrev - a backwards compatible Git port of webrev
git-defpath - a backwards compatible Git port of defpath
git-fork - fork a project on an external Git source code hosting provider to your personal space and optionally clone it
git-pr - interact with pull requests for a project on an external Git source code hosting provider
git-info - show OpenJDK information about commits, e.g. issue links, authors, contributors, etc.
git-token - interact with a Git credential manager for handling personal access tokens
git-translate - translate between Mercurial and Git hashes
git-skara - learn about and update the Skara CLI tools
As mentioned in the "Introduction", all tools support multiple external Git source code hosting providers.
It is not necessary to use the Skara tools to contribute changes. Contributors that prefer to use e.g. desktop applications and/or IDEs that integrate with applicable external Git source code hosting providers are free to do so.
Installing
To install the Skara tooling, simply clone the Skara repository and include the Skara Git configuration file:
Code Block | ||
---|---|---|
| ||
$ git clone http://git.openjdk.java.net/skara $ git config --global include.path "$PWD/skara/skara.gitconfig" |
The Skara tooling will build itself the first time you use any of the Skara commands. To check that everything works run git skara help
.
Personal Access Token
Some of the Skara tools requires a "Personal Access Token" (PAT) to authenticate against an external Git source code hosting provider's API. These tools include:
- git-fork
- git-pr
If you do not intend to use the above tools, then there is no need to set up a PAT and you can skip this section. If you want to make use of the above tools, then please read on.
Git Credential Manager
The first step is to ensure you have a Git credential manager to store your PAT once it has been generated. See the subsections below for how to set up a Git credential manager for you operating system.
Windows
If you installed Git via https://gitforwindows.org/ then you already have a credential manager from Microsoft installed (it is bundled with "Git for Windows"). If you installed Git via some other mechanism, then install https://github.com/Microsoft/Git-Credential-Manager-for-Windows.
macOS
You already have a Git credential manager in Keychain, there is nothing to install or configure.
GNU/Linux
On GNU/Linux the recommended setup is to use libsecret and the "libsecret credential helper" in order to use GNOME Keyring as the Git credential manager. If you are using a desktop environment or distribution without support for GNOME Keyring, please see the "Maual" section.
Fedora
Fedora 29 and 30 (the only two currently supported versions of Fedora) comes with libsecret and GNOME Keyring installed by default. When you install the git package you also get the libsecret credential helper installed. To configure git to use the libsecret credential helper run:
Code Block | ||
---|---|---|
| ||
$ git config --global credential.helper /usr/libexec/git-core/git-credential-libsecret |
If you want to have a graphical utility to inspect the GNOME Keyring we recommend that you install GNOME Seahorse:
Code Block | ||
---|---|---|
| ||
sudo dnf install seahorse |
Ubuntu
Ubuntu 19.04 and 18.04.2 (LTS) (the only two currently supported versions of desktop Ubuntu) comes with libsecret and GNOME Keyring installed by default. Unfortunately even if you install the Git package you will not get a binary version of the libsecret credential helper installed (you only get the source). This means you have to compile the libsecret credential helper yourself. This is easy to do, it just requires two extra commands:
Code Block | ||
---|---|---|
| ||
$ sudo apt install libsecret-1-dev $ sudo make --directory=/usr/share/doc/git/contrib/credential/libsecret |
Once you have compiled the libsecret credential helper you must configure Git to use it:
Code Block | ||
---|---|---|
| ||
$ git config --global credential.helper /usr/share/doc/git/contrib/credential/libsecret/git-credential-libsecret |
If you want to have a graphical utility to inspect the GNOME Keyring we recommend that you install GNOME Seahorse:
Code Block | ||
---|---|---|
| ||
$ sudo apt install seahorse |
Manual
If you are using a desktop environment or distribution without support for GNOME Keyring, or if you want to use your own scheme for storing the PAT, then that is also supported. You can store non-sensitive data such as your username and the URL of the Git source code hosting provider in your ~/.gitconfig
file in the "credential" section:
Code Block | ||
---|---|---|
| ||
[credential "https://github.com"] username = foobar |
For the PAT itself, all Skara tools interacting with an external Git source code hosting provider's API supports the GIT_TOKEN
environment variable. This means that instead of storing your PAT in a Git credential manager you can store it e.g. encrypted on disk using gpg
and then set the GIT_TOKEN
environment variable to the decrypted value when using applicable Skara tools. For example:
Code Block | ||
---|---|---|
| ||
GIT_TOKEN=$(gpg --decrypt ~/pat.gpg) git pr list |
Creating a Personal Access Token
To create a a Personal Access Token on GitHub go to https://github.com/settings/tokens and and click on "Generate new token". You only need to select the "repo" scope (permission). After you have generated your token, store it in your credential manager using git token store
Code Block | ||
---|---|---|
| ||
$ git token store https://github.com Username: <insert your Github username> Password: <insert your "Personal Access Token", not your GitHub password> |
Updating
To update the Skara tooling run git skara update
. this will pull eventual updates and rebuild the tooling if necessary.
Workflows
As mentioned in the "Introduction" there are several workflows available depending on a contributor's preference. In this section we will describe how the Skara tooling can be used, which is one particular workflow. We will also include links to external resources for those whishing to set up the following sections there are external links for those wishing to setup e.g. desktop dekstop applications, text editors mobile apps and/or IDEs to integrate with a Git external source code hosting provider. The last section will cover the Skara CLI tooling which, combined with the OpenJDK mailing lists, offers a workflow similar to the traditional OpenJDK workflow.
Desktop Applications
The following desktop applications has integrations with one or more Git external source code hosting providers:
- SourceTree (macOS, Windows)
- Tower (macOS, Windows)
- GitKraken (GNU/Linux, macOS, Windows)
- GitHub Desktop (Arch Linux, macOS, Windows)
Mobile/Tablet
- GitHub for Mobile (iOS, ipadOS, Android)
- GitPoint (iOS, Android)
- Git Hawk (iOS)
- FastHub (Android)
IDEs
The following integrated development environments (IDEs) integrates with one or more Git external source code hosting providers:
- Eclipse (requires MyLyn connector)
- IntelliJ IDEA (builtin)
- Visual Studio (requires GitHub Extension for Visual Studio plugin)
Text Editors
The following text editors integrates with one or more Git external source code hosting providers:
- Emacs (requires magit plugin and forge plugin)
- VS Code (requires GitHub Pull Requests plugin)
- Atom (requires GitHub for Atom plugin)
CLI
The following command-line interface applications integrates with one or more Git external source code hosting providers:
- hub (FreeBSD, GNU/Linux, macOS, Windows)
- GitHub CLI (GNU/Linux, macOS, Windows)
Skara
The Skara tooling enables a CLI driven workflow where reviews are made either via the mailing lists or in an web browser using an external Git source code hosting provider's web application. The first step in the Skara workflow is to fork and clone an existing upstream repository and create a local branch. A contributor will then make his or her changes, run jcheck on the local commits, push the branch to his or her fork and then finally create a pull request:
Code Block | ||
---|---|---|
| ||
$ git fork https://github.com/openjdk/skara skara $ git checkout -b bugfix $ # make changes $ git jcheck --local $ git push --set-upstream origin bugfix $ git pr create |
Note that the git jcheck --local
step above is not required, the pull request bot will run jcheck on all commits when the pull request is created.
The contributor will now use the mailing lists or the external Git source code hosting provider's web application to respond to feedback from reviewers. Reviewers can review the change with any tools they prefer (including automatically generated webrevs linked from the automatically generated "RFR" email).
A reviewer who wish to use the Skara tooling to mark a pull request as approved can do so by running git pr approve
.
The contributor can integrate changes once reviewers are satisfied with them and has has marked them as reviewed. This is done by executing git pr integrate
.